brother hl-5370dw printer driver for mac

Brother Hl-5370Dw Printer Install And Set

Refer to the access points user guide for instructions on accessing the network settings information.

First I had to reset the printer to its factory defaults (because I had previously set it up to work wirelessly with a Netgear Router).

The Setup Wizard that came with the printer would not see the HL-5370DW in the wireless setp until I reset the printer back to defaults.

For HL-5350DN and HL-5370DW 1 - Turn off the machine.

Make sure that the front cover is closed and the power cord is plugged in.

Hold down Go as you turn on the power switch.

Keep Go pressed down until the all LEDs light up, and then the Status LED turns off.

Release Go. Make sure that all the LEDs turn off.

Press Go six times.

Make sure that all the LEDs light up to indicate the print server has been reset to its factory default settings.

The other thing I had to do was to use AES insted of TKIP for the Encryption mode.

The Start Here app on the DVD gives the error message: You cant open the application Start Here because PowerPC applications are no longer supported.

Brother Hl-5370Dw Printer Install And Set

I was able to download the drivers from Brother support and install and set up the wireless with the instructions above, but it is a very much a manual process now.

After the setup process completes and you close the setup window, nothing really happens.

If not, you may need to connect to your router with an ethernet cable and try to set up the wireless with your security.

Mine was like Seans, AES.The trick will be to get to that web page.

Frankly, it has been awhile since I got it set up, I havent looked at it since.

It worked and it was easier than I thought Thanks for your help.

I recently bought a MBA and had some old instructions I got from Brother to install.

No Luck. Then, I just went to printscan in preferences and saw my MBA saw the printer.

I include this as redundant only because I hope others will find this post sooner than later; I found this only after two hours of troubleshooting using Brothers website support (to no avail).

Follow these simple directions, and set up in less than 5 min.

In my case a new Airport Extreme replaced another wi-fi router.

Everything (computers, phones ) worked except the Brother wireless printer.

Solution for me was to change the Airport Extreme network security from WPA2 Personal to WPAWPA2 Personal.

Once I did this the Brother printer (HL-5370DW) wireless worked again.

The first step was to hold the GO button for 10 seconds to confirm the printer was wireless enabled.

Once I completed this step, the printer simply started working wireless (all qued documents printed up), and I just exited the setup utility.

The printer had always worked with ethernet, but perhaps I had overlooked this final step Either way, I am back to wireless printing (no more moving computers to hook up the ethernet cable).

Brother Hl-5370Dw Printer Driver For Mac